Statistics Dump - Nortel Alteon OS 40M2420 Command Reference Manual

Table 5-31 NTP Statistics Parameters (/stats/ntp)
Field
Last update time
Current system time
N – You can issue /stats/ntp/clear command to delete all statistics.
OTE
/stats/dump

Statistics Dump

Use the dump command to d
depending on your configuration). This
If you want to capture dump data to a file, set your communication software on your worksta-
tion to capture session data prior to issuing the dump commands.
40M2420, April 2007
Description
The time stamp showing the time when the switch was last updated.
The switch system time when the command /stats/ntp was
issued.
ump all switch statistics available from the Statistics Menu (40K or more,
data can be used to tune or debug switch performance.
Alteon OS Command Reference
Chapter 5: The Statistics Menu 167