Table of Contents
Advertisement
Alteon OS Command Reference
/cfg/l3/rmap <route map number>
Routing Map Configuration
N
– The map number (1-32) represents the routing map you wish to configure.
OTE
[IP Route Map 1 Menu]
Routing maps control and modify routing information.
Table 6-67 Routing Map Menu Options (/cfg/l3/rmap)
Command Syntax and Usage
alist <number 1-8>
Displays the Access List menu. For more information, see
aspath <number 1-8>
Displays the Autonomous System (AS) Filter menu. For more information, see
ap <AS number> [<AS number>] [<AS number>]|none
Sets the AS path preference of the matched route. One to three path preferences can be configured.
lp <(0-4294967294)>|none
Sets the local preference of the matched route, which affects both inbound and outbound direc-
tions. The path with the higher preference is preferred.
metric <(1-4294967294)>|none
Sets the metric of the matched route.
type <value (
Assigns the type of OSPF metric. The default is type 1.
262
Chapter 6: The Configuration Menu
alist
- Access List number
aspath
- AS Filter Menu
ap
- Set as-path prepend of the matched route
lp
- Set local-preference of the matched route
metric
- Set metric of the matched route
type
- Set OSPF metric-type of the matched route
prec
- Set the precedence of this route map
weight
- Set weight of the matched route
enable
- Enable route map
disable - Disable route map
delete
- Delete route map
cur
- Display current route map configuration
1
2)>
|
|none
Type 1—External routes are calculated using both internal and external metrics.
Type 2—External routes are calculated using only the external metrics. Type 1 routes have
more cost than Type 2.
none—Removes the OSPF metric.
page
264.
page
265.
40M2420, April 2007
Advertisement
Table of Contents
