Table of Contents
Advertisement
Alteon OS Command Reference
/cfg/port <port alias or number>
Port Configuration
[Port INT1 Menu]
Use the Port Configuration menu to configure settings for individual switch ports, except the
management port (MGT). This command is enabled by default.
Table 6-25 Port Configuration Menu (/cfg/port)
Command Syntax and Usage
gig
If a port is configured to support Gigabit Ethernet, this option displays the Gigabit Ethernet Physi-
cal Link Menu. To view menu options, see
aclqos
Displays the ACL Quality of Service Menu. To view menu options, see
8021ppri <0-7>
Configures the port's 802.1p priority level.
pvid <VLAN number, 1-4095>
Sets the default VLAN number which will be used to forward frames which are not VLAN tagged.
The default number is 1 for non-management ports.
name <64 character string>|none
Sets a name for the port. The assigned port name appears next to the port number on some infor-
mation and statistics screens. The default is set to None.
dscpmark
Enables or disables DSCP re-marking on a port.
tag disable|enable
Disables or enables VLAN tagging for this port. It is disabled by default.
208
Chapter 6: The Configuration Menu
gig
- Gig Phy Menu
aclqos
- Acl/Qos Configuration Menu
8021ppri - Set default 802.1p priority
pvid
- Set default port VLAN id
name
- Set port name
dscpmrk
- Enable/disable DSCP remarking for port
tag
- Enable/disable VLAN tagging for port
tagpvid
- Enable/disable tagging on pvid
fastfwd
- Enable/disable Port Fast Forwarding mode
ena
- Enable port
dis
- Disable port
cur
- Display current port configuration
page
210.
page
211.
40M2420, April 2007
Advertisement
Table of Contents
