System Access Configuration - Nortel Alteon OS 40M2420 Command Reference Manual

cfg/sys/access

System Access Configuration

[System Access Menu]
Table 6-19 System Access Menu Options (/cfg/sys/access)
Command Syntax and Usage
mgmt
Displays the Management Configuration Menu. To view menu options, see
user
Displays the User Access Control Menu. To view menu options, see
http disable|enable
Enables or disables HTTP (Web) access to the Browser-Based Interface. It is enabled by default.
https
Displays the HTTPS Menu. To view menu options, see
wport <TCP port number (1-65535)>
Sets the switch port used for serving switch Web content. The default is HTTP port 80. If Global
Server Load Balancing is to be used, set this to a different port (such as 8080).
snmp disable|read-only|read-write
Disables or provides read-only/write-read SNMP access.
userbbi enable|disable
Enables or disables user configuration access through the Browser-Based Interface (BBI).
tsbbi enable|disable
Enables or disables Telnet/SSH configuration access through the Browser-Based Interface (BBI).
You see this command only if you are connected to the switch through a serial connection.
tnet enable|disable
Enables or disables Telnet access. This command is enabled by default. You see this command
only if you are connected to the switch through a serial connection.
40M2420, April 2007
mgmt - Management Network Definition Menu
user - User Access Control Menu (passwords)
http - Enable/disable HTTP (Web) access
https - HTTPS Web Access Menu
wport - Set HTTP (Web) server port number
snmp - Set SNMP access control
userbbi - Enable/disable user configuration from BBI
tsbbi - Enable/disable telnet/ssh configuration from BBI
tnet - Enable/disable Telnet access
tnport - Set Telnet server port number
tport - Set the TFTP port for the system
cur - Display current system access configuration
Alteon OS Command Reference
page 203.
page 204.
page 207.
Chapter 6: The Configuration Menu 201