Table of Contents
Advertisement
Alteon OS Command Reference
/cfg/l3/if <interface number>
IP Interface Configuration
[IP Interface 1 Menu]
The
GbE Switch Module
sents the
by default.
N
– To maintain connectivity between the management module and the GbE Switch Mod-
OTE
ule, use the management module interface to change the IP address of the switch.
Table 6-59 IP Interface Menu Options (/cfg/l3/if)
Command Syntax and Usage
addr <IP address (such as 192.4.17.101)>
Configures the IP address of the switch interface using dotted decimal notation.
mask <IP subnet mask (such as 255.255.255.0)>
Configures the IP subnet address mask for the interface using dotted decimal notation.
vlan <VLAN number (1-4094)>
Configures the VLAN number for this interface. Each interface can belong to one VLAN, though
any VLAN can have multiple IP interfaces in it.
relay disable|enable
Enables or disables the BOOTP relay on this interface. It is enabled by default.
ena
Enables this IP interface.
dis
Disables this IP interface.
254
Chapter 6: The Configuration Menu
addr
- Set IP address
mask
- Set subnet mask
vlan
- Set VLAN number
relay
- Enable or disable BOOTP relay
ena
- Enable interface
dis
- Disable interface
del
- Delete interface
cur
- Display current interface configuration
can be configured with up to 128 IP interfaces. Each IP interface repre-
on an IP subnet on your network. The Interface option is disabled
GbE Switch Module
40M2420, April 2007
Advertisement
Table of Contents
