Snmpv3 Community Table Configuration - Nortel Alteon OS 40M2420 Command Reference Manual

/cfg/sys/ssnmp/snmpv3/comm

SNMPv3 Community Table Configuration

This command is used for configuring the community table entry. The configured entry is
stored in the community table list in the SNMP engine. This table is used to configure commu-
nity strings in the Local Configuration Datastore (LCD) of SNMP engine.
[SNMPv3 snmpCommunityTable 1
Table 6-15 SNMPv3 Community Table Configuration Menu Options (/cfg/sys/
ssnmp/snmpv3/comm)
Command Syntax and Usage
index <32 character name>
Allows you to configure the unique index value of a row in this table consisting of 32 characters
maximum.
name <32 character name>
Defines the user name as defined in /cfg/sys/ssnmp/snmpv3/usm/name on
uname <32 character name>
Defines a readable 32 character long string that represents the corresponding value of an SNMP
community name in a security model.
tag <list of tag string, max 255 characters>
Allows you to configure a tag of up to 255 characters maximum. This tag specifies a set of trans-
port endpoints to which a command responder application sends an SNMP trap.
del
Deletes the community table entry.
cur
Displays the community table configuration.
40M2420, April 2007
index - Set community index
name - Set community string
uname - Set USM user name
tag - Set community tag
del - Delete communityTable entry
cur - Display current communityTable configuration
Alteon OS Command Reference
Menu]
Chapter 6: The Configuration Menu
page 192.
197