Snmpv3 Notify Table Configuration - Nortel Alteon OS 40M2420 Command Reference Manual

Alteon OS Command Reference
/cfg/sys/ssnmp/snmpv3/notify

SNMPv3 Notify Table Configuration

SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for
particular events or conditions, and generates Notification-Class messages based on these events or con-
ditions.
[SNMPv3 snmpNotifyTable 1
Table 6-18 Notify Table Menu Options (/cfg/sys/ssnmp/snmpv3/notify)
Command Syntax and Usage
name <32 character name>
Defines a locally arbitrary but unique identifier associated with this SNMP notify entry.
tag <list of tag string, max 255 characters>
Allows you to configure a tag of 255 characters maximum that contains a tag value which is used
to select entries in the Target Address Table. Any entry in the snmpTargetAddrTable, that
matches the value of this tag, is selected.
del
Deletes the notify table entry.
cur
Displays the current notify table configuration.
200 Chapter 6: The Configuration Menu
name - Set notify name
tag - Set notify tag
del - Delete notifyTable entry
cur - Display current notifyTable configuration
Menu]
40M2420, April 2007