Nortel Alteon OS 40M2420 Command Reference Manual page 191

Table 6-10 SNMPv3 Configuration Menu Options (/cfg/sys/ssnmp/snmpv3)
comm <snmpCommunity number [1-16]>
The community table contains objects for mapping community strings and version-independent
SNMP message parameters. To view menu options, see
taddr <snmpTargetAddr number [1-16]>
This command allows you to configure destination information, consisting of a transport domain
and a transport address. This is also termed as transport endpoint. The SNMP MIB provides a
mechanism for performing source address validation on incoming requests, and for selecting com-
munity strings based on target addresses for outgoing notifications. To view menu options, see
page
tparam
This command allows you to configure SNMP parameters, consisting of message processing
model, security model, security level, and security name information. There may be multiple trans-
port endpoints associated with a particular set of SNMP parameters, or a particular transport end-
point may be associated with several sets of SNMP parameters. To view menu options, see
page
notify <notify index [1-16]>
A notification application typically monitors a system for particular events or conditions, and gen-
erates Notification-Class messages based on these events or conditions. To view menu options, see
page
v1v2 disable|enable
This command allows you to enable or disable the access to SNMP version 1 and version 2. This
command is enabled by default.
cur
Displays the current SNMPv3 configuration.
40M2420, April 2007
198.
<target params index [1-16]>
199.
200.
Alteon OS Command Reference
page 197.
Chapter 6: The Configuration Menu 191