Link Status Information - Nortel Alteon OS 40M2420 Command Reference Manual

Alteon OS Command Reference
/info/link

Link Status Information

Alias
----
INT1
INT2
INT3
INT4
INT5
INT6
INT7
INT8
INT9
INT10
INT11
INT12
INT13
INT14
MGT1
MGT2
EXT1
EXT2
EXT3
EXT4
EXT5
EXT6
N – The sample screens that appear in this document might differ slightly from the screens
OTE
displayed by your system. Screen content varies based on the type of BladeCenter unit that you
are using and the firmware versions and options that are installed.
Use this command to display link status information about each port on an
slot, including:
Port alias
Port speed (10, 100, 1000, or any)
Duplex mode (half, full, any, or auto)
Flow control for transmit and receive (no, yes, or auto)
Link status (up, down, or disabled)
116 Chapter 4: The Information Menu
Port Speed Duplex
----- ----- --------
1 1000
2 1000
3 1000
4 1000
5 1000
6 1000
7 1000
8 1000
9 1000
10 1000
11 1000
12 1000
13 1000
14 1000
15 100
16 100
17 1000
18 1000
19 1000
20 1000
21 1000
22 1000
Flow Ctrl
--TX-----RX--
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
full yes yes
any yes yes
any yes yes
any yes yes
any yes yes
any yes yes
any yes yes
Link
------
up
up
up
up
down
up
up
up
up
up
up
up
up
up
up
up
up
up
up
up
up
up
GbE Switch Module
40M2420, April 2007