Ip Route Manipulation - Nortel Alteon OS 40M2420 Command Reference Manual

Alteon OS Command Reference
/maint/route

IP Route Manipulation

[IP Routing Menu]
Table 9-6 IP Route Manipulation Menu Options (/maint/route)
Command Syntax and Usage
find <IP address (such as, 192.4.17.101)>
Shows a single route by destination IP address.
gw <default gateway address (such as, 192.4.17.44)>
Shows routes to a default gateway.
type indirect|direct|local|broadcast|martian|multicast
Shows routes of a single type. For a description of IP routing types, see
tag fixed|static|addr|rip|ospf|bgp|broadcast|martian|multicast
Shows routes of a single tag. For a description of IP routing tags, see
if <interface number (1-128)>
Shows routes on a single interface.
dump
Shows all routes.
clear
Clears the route table from switch memory.
N – To display all routes, you can also refer to "IP Routing Information" on
OTE
346 Chapter 9: The Maintenance Menu
find - Show a single route by destination IP address
gw - Show routes to a single gateway
type - Show routes of a single type
tag - Show routes of a single tag
if - Show routes on a single interface
dump - Show all routes
clear - Clear route table
Table 4-21 on page 96
Table 4-22 on page 97
page 95.
40M2420, April 2007