Acl Port Metering Menu - Nortel Alteon OS 40M2420 Command Reference Manual

Alteon OS Command Reference
/cfg/port <port alias or number> aclqos/meter <meter
number>

ACL Port Metering Menu

[Metering Menu]
This menu defines the Access Control profile for the selected ACL group on the port.
Table 6-28 ACL Metering Menu Options (/cfg/port/aclqos/meter)
Command Syntax and Usage
cir <64-1000000>
Configures the committed rate, in Kilobits per second. The committed rate must be a multiple
of 64.
mbsize <32-4096>
Configures the maximum burst size, in Kilobits. Enter one of the following values for
mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096
enable e|d
Enables or disables ACL Metering on the port.
dpass drop|pass
Configures the ACL Meter to either drop or pass out-of-profile traffic.
assign acl|blk|grp <1-4096>
Adds an ACL, ACL Block, or ACL Group to the ACL Meter on this port.
unassign acl|blk|grp <1-4096>
Removes an ACL, ACL Block, or ACL Group from the ACL Meter on this port.
reset
Reset ACL Metering parameters to their default values.
cur
Displays current ACL Metering parameters.
212 Chapter 6: The Configuration Menu
cir - Set committed rate in KiloBits/s
mbsize - Set maximum burst size in KiloBits
enable - Enable/disable port metering
dpass - Set to Drop or Pass out of profile traffic
assign - Assign meter to ACL, ACL block or ACL group
unassign - Unassign meter from ACL, ACL block or ACL group
reset - Reset meter parameters
cur - Display current settings
40M2420, April 2007