Table of Contents
Advertisement
3.
Click on the Display Fields tab.
The Display Fields tab appears.
The Selected Fields list box shows the fields that are currently displayed in the MasterDirectory
window for the directory. The order in which the fields are displayed in the Selected Fields list box
indicates the order the fields are displayed in the MasterDirectory window.
The Remaining Fields list box shows the fields that are not displayed in the MasterDirectory window
for the directory.
You can use the following buttons to set the fields that you want displayed:
•
Add, which places the field that is selected in the Remaining Fields list box after the field that is
selected in the Selected Fields list box.
•
Remove, which removes the selected field from the Selected Fields list box and places it in the
Remaining Fields list box.
•
Remove All, which removes all of the fields from the Selected Fields list box and places them in
the Remaining Fields list box.
•
Move Up/Move Down, which moves the selected field up or down in the Selected Fields box.
(The order in which the fields are displayed in the Selected Fields list box indicates the order the
fields are displayed in the MasterDirectory window.)
4.
Make your changes.
5.
When you are finished, choose the OK button.
Chapter 3: Working with Directories
47
Advertisement
Table of Contents
