Table of Contents
Advertisement
3.
Click on the Field Parameters tab.
The Field Parameters tab appears.
This tab displays all of the fields and their associated parameters in the directory.
4.
Select the field that you want to modify, and choose the Change button.
The Field Parameters dialog box appears.
This dialog box shows the current parameters for the current field.
5.
Make your changes to the parameters for the selected field.
6.
Select the Allow Update check box if you want to allow changes to be made to the data in the
associated field for the records.
7.
Select the Required Field check box if the field must contain data (that is, the field cannot be blank).
8.
If the field must contain data from a pick list, select the Values come from Pick-List check box and
then enter the values.
9.
When you are finished, choose the OK button.
10. Repeat steps 4 to 9 if you want to modify the parameters for any other fields.
11. When you are finished, choose the OK button.
Chapter 3: Working with Directories
43
Advertisement
Table of Contents
