Table of Contents
Advertisement
16. Choose the Add button.
The Choose LDAP Attribute dialog box appears.
17. Select the attribute to which the selected field will be mapped, and then choose the OK button.
18. Select the next field you want to export.
19. Perform one of the following steps:
•
If you want to combine the selected field with the first field selected in the Destination File box,
choose the Join button.
The field appears next to the other field in the Destination File box.
•
If you want to add the selected field after the field selected in the Destination File box, choose the
Add button.
The field appears after the selected field in the Destination File box.
•
If you want to add the selected field before the field selected in the Destination File box, choose
the Insert button.
The field appears before the selected field in the Destination File box.
20. Repeat steps 18 and 19 for any other fields that you want to export.
21. When you are finished mapping fields for export, choose the Next button.
The Export To LDAP (Step 3 of 3) dialog box appears.
22. Select the attribute that will be used for DN when new LDAP entries are created.
Chapter 5: Exporting Data to Directories
141
Advertisement
Table of Contents
