Setting Parameters - Altigen MAXCS ACC 6.0 Administration Manual

Add and delete a gateway
•
Attach and detach a gateway
•
Change a gateway name, IP address, password, country
•
Set TDM Bus mode for a gateway
•
Set CT-Bus clock for a gateway
•
Set whether the gateway is in service or out of service
•
To open the Media Server/Gateway Management window, select
System > Media Server/Gateway Management.
Figure 4. Media Server/Gateway Management window

Setting Parameters

To read or set parameters for a specific gateway, first select the gateway in the All
Gateways list. After making changes to a gateway, click Apply before selecting another
gateway. When you are finished with the window, click Close.
Parameter
All Gateways
Status
Name
Chapter 5: Media Server and Gateway Management
Description
Lists all gateways that have been added using
the Add button in this window.
Shows the status of the selected gateway:
active, disconnected, initializing, resetting,
failed. (Read-only field.)
The name you gave the selected gateway for
easy identification.
MAXCS ACC 6.0 Administration Manual 71