Table of Contents
Advertisement
3.
Remove the perforated metal breakaway panel from the slot on the front of the
chassis by pulling it back and forth until it breaks off (see Figure 5-5).
Card Guide Removal
Use the following steps to remove the card guide:
1.
Remove the system unit cover and front panel as previously described.
Locate the card guide on the front inner wall of the chassis.
2.
Press the top and bottom sides together to release the locking tabs securing the
3.
card guide to the chassis.
Pull the card guide away from the chassis wall and out of the chassis.
4.
Figure 5-5 Locating the Breakaway Panel
Repair
5-7
Advertisement
Table of Contents
Troubleshooting
