Table of Contents
Advertisement
3-24
Option Installation
Device Cables
The cables used for the installation of optional storage devices include:
T
diskette drive signal cable
T
IDE signal cables
T
SCSI signal cable (SCSI configured systems only)
T
system power cables.
The installed diskette drive cable supports only the standard diskette drive. If installing a
second diskette drive, an optional three-connector drive cable is required. The installed
three-connector IDE cable on the secondary PCI/IDE channel supports two devices. The
installed two-connector IDE cable on the primary PCI/IDE channel supports one device.
The installed SCSI drive cable (SCSI configurations only) supports three devices. The
diskette and IDE signal cables connect to the riser board. The SCSI cable connects to the
internal 68-pin connector on the SCSI adapter board.
Cable connector locations on the riser board are shown in Figure 3-19.
Figure 3-19 Riser Board Cable Connectors
Advertisement
Table of Contents
Troubleshooting
