NEC PowerMate Enterprise Manual page 71

2. Connect the keyboard, mouse, monitor, and printer cables to the back of the
system (see Figure 2-2). The monitor connects to the VGA monitor connector on
the AGP video board (if installed) or the PCI video board installed in one of the
expansion slots.
If the system comes with a fax/modem board, connect it to the telephone line as
3.
follows:
T
Unplug the telephone from the telephone jack on the wall.
T
Plug the telephone cable that comes with the system into the line jack on the
system (see Figure 2-3) and into the telephone jack on the wall.
T
Plug the cable on the telephone into the phone jack on the system.
Figure 2-3 Fax/Modem Connections
Figure 2-2 Peripheral Connections
Setup and Operation 2-3