Memory Banks 0, 1, And 2; L2 Cache Ecc Support; Resource Configuration - NEC PowerMate Enterprise Manual

2-18 Setup and Operation

Memory Banks 0, 1, and 2

The three Memory Bank fields are read only. They display the total amount of memory in
each DIMM bank.

L2 Cache ECC Support

This field appears only when DIMMs that support the Error Checking and Correction
(ECC) feature are installed.

Resource Configuration

T
Memory Reservation
Use this field to reserve specified blocks of upper memory for use by other ISA
devices. Select "Reserved" to choose a memory block. The default for each block
is "Available."
The following list includes the available memory blocks:
C800-CBFF
CC00-CFFF
D000-D3FF
D400-D7FF
D800-DBFF
DC00-DFFF
Memory Hole
The default setting for this parameter is "Disabled." When set to "Enabled,"
this parameter turns system RAM off to free address space for use with an
option card. When enabled, memory choices are "Conventional" or
"Extended." Either a 128-KB conventional memory hole (starting at 512 KB)
or a 1-MB extended memory hole (starting at 15 MB) is created in system
RAM.
T
IRQ Reservation
Use this field to reserve specified IRQs for legacy ISA cards. Select "Reserved"
to choose an IRQ. The default for each IRQ is "Available." The following list
includes the available IRQs:
IRQ 3
IRQ 4
IRQ 5
IRQ 7
IRQ 10
IRQ 11.