Table of Contents
Advertisement
Connecting an RS-232C Device
Connect an RS-232 serial device as follows:
1.
Turn off power to the system and to the serial device.
2.
Connect one end of the serial cable to the serial port on the rear of the computer
(see Figure 3-36).
3.
Secure the cable with the screws provided.
Connect the other end to the serial device.
4.
NOTE: Before connecting a serial device to the
system, be sure the serial device is set up
correctly. Follow the setup instructions that
come with the option.
Figure 3-36 Connecting the RS-232C Cable
Option Installation
3-43
Advertisement
Table of Contents
Troubleshooting
