2-40
Setup and Operation
6.
After you select the FAT type, a warning screen appears indicating that the
system is about to partition and format the hard disk using the FDISK program.
This warning screen (see the following figure) contains three options: Back, Exit,
and Continue.
T
Click
Back
T
Click
Exit
T
Click
Continue
7.
If you click
selected and reboots the system. After the reboot, all partitions are formatted.
When all the partitions have been formatted, the OS loads from the CD. The
Installing Applications screen appears (as shown below). This screen also displays
the version of Windows OS being installed.
After the OS finishes loading, the Operating System Restore Completed screen
appears.
to return to the Partition Information screen.
to terminate the restore process.
to perform FDISK.
Figure 2-15 FAT16 Partition Screen
Continue
, the system performs FDISK using the FAT type you
Figure 2-16 Installing Application Screen
NOTE: The drivers and other software
components required for the operating system
are also loaded from the CD.