Table of Contents
Advertisement
NOTE: The drivers and other software
components required for the operating system
are also loaded from the CD.
After the OS finishes loading, the Operating System Restore Completed screen
appears. Skip to step 9.
7.
To partition the hard drive, click
screen. The Partition Information screen appears (in Windows 95 systems only;
in Windows NT 4.0 systems, the FAT16 Partition warning appears as described
later in this procedure).
The Partition Information screen has three options and lets you select the File
Allocation Table (FAT) type you want to use for the operating system restore:
T
Click
to return to the Operating Mode screen.
Back
T
Click
FAT 16
for Windows 95 systems with older software).
T
Click
FAT 32
systems only).
NOTE: Some older software may not work in a
Windows 95 system configured for FAT 32.
Figure 2-22 Partition Information Screen
NOTE: In Windows NT 4.0 systems, the
Partition Information screen does not appear.
Instead, the FAT16 Partition warning appears.
This screen is described in the following
paragraph.
Continue
to select the FAT16 allocation table (currently recommended
to select the FAT32 allocation table (available for Windows 95
Setup and Operation
on the Partitioning the Hard Drive
2-45
Advertisement
Table of Contents
Troubleshooting
