Pc Card Bay Removal; Locating The Pc Card Bay Screws; Locating The Pc Card Bay Connector; Pc Card Bay - NEC POWERMATE eco Service And Reference Manual

PC Card Bay Removal

Remove the PC Card bay as follows.
Remove the system board (see "System Board Removal" earlier in this chapter).
1.
2. Position the system board with the processor side of the board facing down.
Remove the four screws securing the PC Card bay to the system board (see the following
3.
figure).
A – Front Side of System Board
Turn the system board over with the processor side of the board facing up.
4.
5. Unplug the PC Card bay from the its connector on the system board and remove the bay
from the board.
A – PC Card Bay

Locating the PC Card Bay Screws

Locating the PC Card Bay Connector

B – PC Card Bay Connector
B – PC Card Bay Screws (4)
Disassembly and Reassembly 3-15