Table of Contents
Advertisement
6.
Replace the slot cover and secure it with the screw.
7.
Replace the AGP video board, if the system has one (see "Replacing an AGP
Video Board" later in this section).
Replace the system unit cover as previously described.
8.
SYSTEM BOARD OPTIONS
This section describes how to remove and replace the system board. This section also
describes how to change options on the system board. System board options that can be
changed include:
T
adding an AGP video board
T
adding memory modules
T
changing jumper settings.
The following figure shows the locations of the sockets and connectors on the system
board.
Figure 3-8 System Board Sockets and Connectors
NOTE: See Appendix B for the location of the
system board jumper and its settings.
Option Installation
3-11
Advertisement
Table of Contents
Troubleshooting
