Disable / Re-Enable All Control, Extinguishing And Ventilation Outputs - Panasonic MEW01091 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01091 Rev: 3
11 Disable / Re-enable all control,
extinguishing and ventilation
outputs
All control outputs programmed as type:

Control (general)

Fire ventilation

Extinguishing system
... can via menu H2/B4 be collectively disabled. This is indicated by
the LED "Disablements" (L8).
They will remain disabled until they are re-enabled again via menu
H2/B8.
See also chapter "Disable all control, extinguishing, ventilation and
alarm device outputs (H2/B4)", page 85.
31
EBL128 Operating Instructions V1.1.x