Disable / Re-Enable Alarm Devices - Panasonic MEW01091 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01091 Rev: 3
9

Disable / Re-enable alarm devices

28
All outputs programmed for sounders (type Alarm devices) can via
menu H2/B4 be collectively disabled. This is indicated by LED
"Disablements" (L8) and LED Fault / Disablements "Alarm devices"
(L13) steady (continuous).
NOTE! They will remain disabled until they are re-enabled again via
menu H2/B8.
See also chapter "Disable all control, extinguishing, ventilation and
alarm device outputs (H2/B4)", page 85.
29
EBL128 Operating Instructions V1.1.x