Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01091
Rev: 3
The FBP is used by the fire brigade personnel to see which alarm
point / zone having activated the fire alarm(s), silence alarm devices,
reset alarms, etc. In the display (LCD, 2x40 alphanumeric characters),
the information displayed on the first row is depending on how many
alarm points / zones having activated fire alarm, convention and
language.
On the second row is, for the activated alarm point / zone, an alarm
text shown, if programmed. See chapter "Fire alarm", page 39.
Required fire brigade personnel manoeuvres are performed via the
FBP in EBL128 or via an external FBP 1826 / 1828.
Instead of external FBPs 1826 / 1828, the German Fire Brigade
Control Panels (Feuerwehr-Bedienfeld) FBF 2003 and/or German
Fire Brigade Indicator Panels (Feuerwehr-Anzeigetableau) FAT 2002
can be used.
The CP is used by the EBL128 owner, service personnel, etc. to
"communicate" with EBL128, e.g. for monthly tests, disablements
commissioning, maintenance and service. Access codes for different
access levels are required. A keypad is used to get access to the menu
tree, i.e. main and sub menus for data input / output, manoeuvres, etc.
The CP also holds several system status LEDs.
13
EBL128 Operating Instructions V1.1.x
Advertisement
Table of Contents
