Access Level 2B - Panasonic MEW01091 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01091 Rev: 3
7.3

Access level 2B

When the door has been opened via the fire brigade key and the door
switch has been activated (LED "Door open" is lit), the building
occupier has access like in access level 2A and after access code for
level 2B (or 3A) the following menus:
H1 Perform monthly test.
H2 Disable or re-enable.
B1 Disable zone
B2 Disable zone / address
B3 Disable output
B4 Disable all control, ventilation, exting or alarm devices outputs
B5 Re-enable zone
B6 Re-enable zone / address
B7 Re-enable output
B8 Re-enable all control, ventil, exting or alarm devices outputs
B9 Disable / Re-enable outputs for routing equipment
B10 De-activate alert annunciation function
H3 Set calendar and clock.
H4 Present system status on display.
U1 Disablement
U2 Disablement by time channel.
U3 Show values.
U4 Sensors activating SERVICE signal
U5 Show event log
U6 Show configuration and alarm counter
H6 Acknowledge FAULTS.
H7 Perform ZONE TEST (Test mode).
H9 Interlocking outputs and inputs
C1 Activated interlocking outputs/inputs
C2 Activate interlocking output
C3 Reset interlocking output
C4 Disable interlocking output
C5 Re-enable interlocking output
H10 Change access code for daily duties (access level 2B).
24
EBL128 Operating Instructions V1.1.x