Revision; Introduction - Panasonic MEW01091 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01091 Rev: 3
1

Introduction

EBL128 Operating Instructions is a document
special interest for the end user and the fire brigade personnel, as
well as service / commissioning engineers.
It should be read in conjunction with the EBL128 Planning
Instructions, since most of the information in one of the documents is
not found in the other document and vice versa.
It should also be read in conjunction with the EBL128 drawings
according to the valid Table of drawings.
A Product Leaflet is also available at:
http://www.panasonic-fire-security.com/pewfste/en/html (Data sheets)
Due to continual development and improvement, different S/W
versions are to be found. This document is valid for S/W version
1.1.x. On the date of the document is x=2.
NOTE! Regarding upgrade from S/W version 1.0.x to version 1.1.x
see chapter "Software (S/W) download", page 71.
EBL128 is produced for many countries, accordingly the look, the
texts, the functions, etc. might vary.
Products
Consists of one or more parts (H/W) according to a Product Parts
List. A product has:

a type number (e.g. 4550)

an article number, often = the type no. but sometimes is a
country code added (e.g. 4550SE)

a product name (e.g. EBL128 Control & Indicating
Equipment, 128 addresses)
H/W
A H/W (e.g. a printed circuit board) has:
 a type number (e.g. 1556)
 an article number, often = the type no. but sometimes is a
country code added (e.g. 1556SE)
 a product name (e.g. Main Board 128 addr.)
 a p.c.b. number (e.g. 9261-3A) and can also have a configuration
(e.g. CFG: 1) and a revision (e.g. REV: 2)
 sometimes a S/W
S/W
A S/W has:
1
File name: K:\PRO\FIRE\128\Doc\V1.1.x\MEW01091 (Rev 3).doc
2
Dimensions & overviews, connection diagrams, etc.
6
EBL128 Operating Instructions V1.1.x
1
with information of
2
,