Panasonic Electric Works Nordic AB
MEW01091
29
Action
"Access"
Scroll to menu H6.
"A"
"Fault acknowledge"
"Return"
Rev: 3
Acknowledge FAULTS (H6)
Regarding fault indication, etc., see chapter "Fault", page 54.
All faults are normally latched, i.e. all faults have to be acknowledged.
See also chapter "Fault acknowledge", page 67.
All fault events are stored in the event log and can be listed. See also
chapter "Event log (H4/U5)", page 101.
In this menu (H6) are up to 100 faults listed:
Not corrected and not acknowledged faults
Not corrected but acknowledged faults
Corrected (serviced) but not acknowledged faults
The way the date is presented is different for different languages.
Text in display
Acknowledge FAULTS
FAULT: Xxxxxxxx............
Date: MM-DD
Time: HH:MM
FAULT: Xxxxxxxx............
Date: MM-DD
Time: HH:MM
Acknowledge FAULTS
95
If faults are set – via Win128 – to be "Not latched", Serviced will never be
shown.
96
When the list is empty, i.e. when all faults are acknowledged and
corrected, you will automatically return to menu H6:
EBL128 Operating Instructions V1.1.x
ACCEPT? H6
See comments
Acknowledged
ACCEPT? H6
115
95
Comments
According to chapter
"Access", see page 78.
This is a list in which
you can scroll. The first
fault in the list is the
most recent fault. If a
fault is corrected, the
95
text: Serviced
is
shown. To acknowledge
the fault shown in the
display, press "Fault
acknowledge" (P6).
The fault is now
Acknowledged. When
the fault is corrected it
will be removed from the
96
list.
Scroll in the list
e.g. to acknowledge
more faults or press
"Return" to menu H6.
Scroll or press "Return"
to log off.