To Restore Waveform Generator Defaults - Agilent Technologies InfiniiVision 2000 X-Series User Manual

To restore waveform generator defaults

1 If the Waveform Generator Menu is not currently displayed on the
2 In the Waveform Generator Menu, press the Settings softkey.
3 In the Waveform Generator Settings Menu, press the Default Wave Gen
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
oscilloscope's softkeys, press the [Wave Gen] key.
softkey.
The waveform generator factory default settings (1 kHz sine wave,
500 mVpp, 0 V offset, High- Z output load) are restored.
Waveform Generator
16
215