Use Auto Scale - Agilent Technologies InfiniiVision 2000 X-Series User Manual

1
Getting Started
In the Save/Recall Menu, there are also options for restoring the complete
factory settings (see
a secure erase (see

Use Auto Scale

Use [Auto Scale] to automatically configure the oscilloscope to best display
the input signals.
1 Press [Auto Scale].
2 If you want to return to the oscilloscope settings that existed before,
3 If you want to enable "fast debug" autoscaling, change the channels
26
"Recalling Default Setups"
"Performing a Secure Erase"
You should see a waveform on the oscilloscope's display similar to this:
press Undo AutoScale.
autoscaled, or preserve the acquisition mode during autoscale, press
Fast Debug, Channels, or Acq Mode.
These are the same softkeys that appear in the AutoScale Preferences
Menu. See "To set AutoScale preferences"
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
on page 229) or performing
on page 229).
on page 245.