17
Save/Recall (Setups, Screens, Data)
218
•
Setup (*.scp) — The oscilloscope's horizontal timebase, vertical
sensitivity, trigger mode, trigger level, measurements, cursors, and
math function settings that tell the oscilloscope how to make a
particular measurement. See
8-bit Bitmap image (*.bmp) — The complete screen image in a reduced
•
color (8- bit) bitmap format. See
page 219.
24-bit Bitmap image (*.bmp) — The complete screen image in a 24- bit
•
color bitmap format. See
page 219.
24-bit image (*.png) — The complete screen image in a 24- bit color PNG
•
format that uses lossless compression. Files are much smaller than
the BMP format. See
CSV data (*.csv) — This creates a file of comma- separated values of all
•
displayed channels and math waveforms. This format is suitable for
spreadsheet analysis. See
files"
on page 220.
ASCII XY data (*.csv) — This creates separate files of comma- separated
•
values for each displayed channel. This format is also suitable for
spreadsheets. See
page 220.
Reference Waveform data (*.h5) — Saves waveform data in a format that
•
can be recalled to one of the oscilloscope's reference waveform
locations. See
"To save reference waveform files to a USB storage
device"
on page 225.
ALB data (*.alb) — This creates an Agilent proprietary format file that
•
can be imported by the Agilent Logic Analyzer application software,
using the Agilent B4610A Data Import tool, for offline viewing and
analysis. See
"To save ALB data files"
Binary data (*.bin) — This creates a binary file, with a header, and data
•
in the form of time and voltage pairs. This file is much smaller than
the ASCII XY data file. See
files"
on page 220.
"To save setup files"
"To save BMP or PNG image files"
"To save BMP or PNG image files"
"To save BMP or PNG image files"
"To save CSV, ASCII XY, or BIN data
"To save CSV, ASCII XY, or BIN data files"
"To save CSV, ASCII XY, or BIN data
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
on page 219.
on page 219.
on page 221.
on
on
on