This chapter explains oscilloscope utility functions.
I/O Interface Settings
The oscilloscope can be accessed and/or controlled remotely via these I/O
interfaces:
• USB device port on the rear panel (square shaped USB port).
• LAN interface when a LAN/VGA module is installed in the rear panel
• GPIB interface when a GPIB module is installed in the rear panel
To configure the I/O interfaces:
1 On the oscilloscope's front panel, press [Utility].
2 In the Utility Menu, press I/O.
Agilent InfiniiVision 2000 X-Series Oscilloscopes
User's Guide
19
Utility Settings
module slot.
module slot.
237
241
243
246
247
254
s1
238
246
253
237