Length Control - Agilent Technologies InfiniiVision 2000 X-Series User Manual

Table 5
Label
TxRS232
RxRS232
I2C
SPI2 (2-wire)
SPI3 (3-wire)
SPI4 (4-wire)
CAN
LIN
4 Finally, press the Press to Save softkey.

Length Control

The Length control is available when saving data to CSV, ASCII XY, BIN, or
ALB format files. It sets the number of data points that will be output to
the file. Only displayed data points are saved.
The maximum number of data points depends on these things:
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
Recommended Signal Mapping
Signal
Tx
Rx
Data
Clk
Clk
Data
~Chip Select
Clk
Data
~Chip Select
Clk
DataIn
DataOut
Data
Data
A message indicating whether the save was successful is displayed.
Save/Recall (Setups, Screens, Data)
Oscilloscope Maps to Logic
Channel Analyzer Channel
Ch1 D0
Ch2 D1
Ch1 D0
Ch2 D1
Ch1 D0
Ch2 D1
Ch1 D0
Ch2 D1
Ch3 D2
Ch1 D0
Ch2 D1
Ch3 D2
Ch4 D3
Ch1 D0
Ch1 D0
17
223