Digital Channels," Starting On; Front Panel Overlays For Different Languages - Agilent Technologies InfiniiVision 2000 X-Series User Manual

19.
20.
21.

Front Panel Overlays for Different Languages

Front panel overlays, which have translations for the English front panel
keys and label text, are available in 10 languages. The appropriate overlay
is included when the localization option is chosen at time of purchase.
To install a front panel overlay:
1 Gently pull on the front panel knobs to remove them.
2 Insert the overlay's side tabs into the slots on the front panel.
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
USB Host port This port is for connecting USB mass storage devices or printers to the
oscilloscope.
Connect a USB compliant mass storage device (flash drive, disk drive,
etc.) to save or recall oscilloscope setup files and reference waveforms
or to save data and screen images. See
(Setups, Screens, Data)," starting on page 217.
To print, connect a USB compliant printer. For more information about
printing see
You can also use the USB port to update the oscilloscope's system
software when updates are available.
You do not need to take special precautions before removing the USB
mass storage device from the oscilloscope (you do not need to "eject"
it). Simply unplug the USB mass storage device from the oscilloscope
when the file operation is complete.
CAUTION:
USB host port. Use the device port. A host computer sees the
oscilloscope as a device, so connect the host computer to the
oscilloscope's device port (on the rear panel). See
Settings"
There is a second USB host port on the back panel.
Digital channel Connect the digital probe cable to this connector (MSO models only). See
inputs Chapter
Waveform Outputs sine, square, ramp, pulse, DC, or noise on the Gen Out BNC.
generator Press the [Wave Gen] key to set up the waveform generator. See
output Chapter
Chapter 18, "Print (Screens)," starting on page 231.
Do not connect a host computer to the oscilloscope's
on page 237.
6, "Digital Channels," starting on page 81.
16, "Waveform Generator," starting on page 205.
Getting Started
Chapter 17, "Save/Recall
"I/O Interface
1
35