13
Measurements
The units of math waveforms are described in
Waveforms"
•
•
•
•
•
•
•
•
•
•
•
Peak-Peak
The peak- to- peak value is the difference between Maximum and Minimum
values. The Y cursors show the values being measured.
Maximum
Maximum is the highest value in the waveform display. The Y cursor
shows the value being measured.
Minimum
Minimum is the lowest value in the waveform display. The Y cursor shows
the value being measured.
Amplitude
The Amplitude of a waveform is the difference between its Top and Base
values. The Y cursors show the values being measured.
174
on page 65.
"Peak- Peak"
on page 174
"Maximum"
on page 174
"Minimum"
on page 174
"Amplitude"
on page 174
"Top"
on page 175
"Base"
on page 176
"Overshoot"
on page 176
"Preshoot"
on page 177
"Average"
on page 178
"DC RMS"
on page 178
"AC RMS"
on page 179
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
"Units for Math