Probes And Accessories; Passive Probes - Agilent Technologies InfiniiVision 2000 X-Series User Manual

21
Reference

Probes and Accessories

This setion lists the probes and accessories that are compatible with the
2000 X- Series oscilloscopes.
•
•
•
•
Because the 2000 X- Series oscilloscopes do not have a ring around the
BNC connector for identifying probes, you must set the probe attenuation
factor manually. See
See Also
For more information on probes and accessories, see
for:
•
•

Passive Probes

Passive probes are included with the 2000 X- Series oscilloscopes for each
analog channel.
The following passive probes can be used with the InfiniiVision
2000 X- Series oscilloscopes. Any combination of passive probes can be
used.
Table 6
Model
1165A
10070C/D
10073C
10074C
10076A/B
276
"Passive Probes" on page 276
"Differential Probes"
"Current Probes" on page 277
"Accessories Available"
"To specify the probe attenuation"
"Probes and Accessories Selection Guide (5989- 6162EN)"
"5000, 6000, and 7000 Series InfiniiVision Oscilloscope Probes and
Accessories Data Sheet (5968- 8153EN)"
Passive Probes
Description
Passive probe, 10:1, 600 MHz, 1.5 m
Passive probe, 1:1 20 MHz, 1.5 m
Passive probe, 10:1, 500 MHz, 1.5 m
Passive probe, 10:1, 150 MHz, 1.5 m
Passive probe, 100:1, 4 kV, 250 MHz
on page 277
on page 278
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
on page 60.
"www.agilent.com"