Connecting Ethernet Cables In A Multipath Configuration; Connecting Power Cords - HP StorageWorks 1510i - Modular Smart Array User Manual

Connecting Ethernet cables in a multipath configuration
In the following illustration, additional items and cabling connections are needed in a multipath
configuration.
1 Additional iSCSI Ethernet network switch
2 Additional MSA 2–Port Ethernet iSCSI module
3
Additional Ethernet cables for the redundant path

Connecting power cords

To protect your system from power-failure-related downtime, each MSA1510i ships standard with a
redundant power supply. Depending on how you connect the power supplies to your power source, you
can eliminate downtime caused by power-related failures.
When connecting the power cords, use the power cords shipped with the MSA1510i.
After power is supplied to the MSA1510i, the power supply automatically senses the input voltage and the
LED behind the power switch illuminates as solid amber.
52
Installation