User Input Messages; Lcd Message Descriptions - HP StorageWorks 1510i - Modular Smart Array User Manual

User input messages

User input messages indicate that the system has encountered a situation that allows user input. The user
can select from a number of choices. If the user does not select one of the choices in a set amount of
time, the system selects the default setting. These user input messages only occur during system power
on, and not during runtime.
The array controller Fault LED to the left of the LCD panel display window blinks on and off when a user
input message is currently being viewed and is available for input. If input is not provided within the
time-out period, the message remains, but the LED stops blinking.

LCD message descriptions

NOTE:
Some messages may specify a box number. For the MSA1500 and MSA1510i, the following box
numbers are predefined:
Predefined box number
Box 1
Box 2
Box 3
Box 4
Box 5
Box 6
Box 7
Box 8
The following table contains the defined messages and their components:
Table 7 LCD message descriptions
Message
00 ARRAY
CONTROLLER
FIRMWARE VER
<version>
01 MSA STARTUP
COMPLETE
Physical connection to MSA SCSI I/O module
Port A of SCSI I/O module 1 (Bus 0)
nl
(right port on the right-most SCSI I/O module)
Port A of SCSI I/O module 2 (Bus 1)
Port A of SCSI I/O module 3 (Bus 2)
Port A of SCSI I/O module 4 (Bus 3)
Port B of SCSI I/O module 1 (Bus 0)
Port B of SCSI I/O module 2 (Bus 1)
Port B of SCSI I/O module 3 (Bus 2)
Port B of SCSI I/O module 4 (Bus 3)
nl
(left port on the optional left-most SCSI I/O module)
Type Description
Displays the current version of
Informational firmware running on the array
controller.
The array controller has completed
Informational its power on sequence and is now
operational.
1510i Modular Smart Array installation and user guide
Action
107