HP StorageWorks 1510i - Modular Smart Array User Manual page 73

3.
To make any changes to the existing CHAP parameters, click Configure.
The CHAP Authentication dialog box opens.
4. To keep CHAP enabled, make sure Use the following CHAP credentials is selected.
5.
To use a new CHAP name, uncheck the Use initiator name check box, and enter the name
of your choice.
6.
If needed, specify the CHAP secret.
All new targets will use the CHAP secret to authenticate the initiator. Any established sessions
are not affected.
7.
Click OK to save changes.
8. Perform a rescan.
1510i Modular Smart Array installation and user guide
73