Reading Startup Messages On The Controller Display Panel; Msa1510I Controller Lcd Startup Messages - HP StorageWorks 1510i - Modular Smart Array User Manual

MSA1510i component LED
Power supply module status LED
Fan control module status LED
2-Port Ethernet iSCSI module status LED
SCSI I/O module status LED

Reading startup messages on the controller display panel

Each controller contains an integrated LCD panel. This panel displays informational and error messages,
shows the current status of the MSA1510i, and provides an interface for user input. To verify that your
MSA1510i is operating properly, press the arrow buttons on the controller LCD panel and look for
the following messages:
Table 5 MSA1510i controller LCD startup messages
Message
01 MSA Startup Complete
00 Array Controller Firmware
ver <version>
603 Port #MA0 IP <address>
56
Installation
Meaning
Controller has completed its power-on
sequence and is operational.
Firmware version installed on the controller.
IP address assigned to the Ethernet iSCSI
module management port (Port 0).
Condition
Solid green = power is on.
Solid green = power is on.
Solid green = power is on,
the module is operational, and
communication between the
module and the controller is
established.
Solid green = power is on.