Changing Network Device Settings; Creating The Network Configuration Information (Xml Definition) - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

Yes: Modification is possible
No: Modification is not possible
*1: Even after changing external connection ports, virtual switches, port groups, and virtual bridges that have been deployed can be used
as is. New information on the external connection ports will be reflected on the configuration of virtual switches, port groups, and virtual
bridges deployed after modification of the network resource. When modifying the deployed network according to the external connection
port, server virtualization software must be operated directly to do so.
*2: Even after changing physical LAN segments, virtual switches, port groups, and virtual bridges that have been deployed can be used
as is. New information on the physical LAN segments will be reflected on the configuration of virtual switches, port groups, and virtual
bridges deployed after modification of the network resource. When modifying the deployed network according to the physical LAN
segment, server virtualization software must be operated directly to do so.
*3: The subnet address and subnet mask of admin LAN can be changed, when there are no physical servers using the network resources
of the target of modification.
*4: Modification can be performed by executing the rcxadm mgrctl modify command.
*5: Possible when the network resource has been created specifying auto="true" for the "<SwitchConfiguration>" element in the XML
definition file.
Use the following procedure to change network resource specifications.
1.
Right-click the target network resource in the orchestration tree, and select [Change Settings]-[Modify Specification] from the popup
menu.
The [Modify a network resource] dialog is displayed.
2.
Change the items you want to modify.
3.
Click <OK>.
The network resource is changed.
Note
-
The default gateway address of an admin LAN resource which is the same subnet address as that of the manager cannot be changed.
When changing the number of the IP address to use after changing the subnet addresses or subnet masks, the IP address for L-Server
is also automatically changed.
As the OS configuration installed on an L-Server is not changed, manually change it to match the detailed information of the L-Server.
-
Making the following change to the network resource for which automatic configuration of VLAN on the external connection port is
specified may cause a network loop.
-
Adding another external connection port on a LAN switch blade which has been already specified as an external connection port
In this case, take action to prevent a network loop first, such as disconnecting the cable for the external connection port to be added,
before making changes to the network resource.

7.6 Changing Network Device Settings

This section explains how to change settings of network devices.
Use the following procedure to change the settings of a registered network device:
1.
Create network configuration information for the target network device.
2.
Change the network device settings based on the network configuration information created in 1.

7.6.1 Creating the Network Configuration Information (XML Definition)

Create the network configuration information necessary for changing the registered network device settings.
In the following cases, it is possible to create network configuration information that can be used as input information for changes based
on its original network configuration information.
-
When the network configuration information used for registering the network device exists
- 82 -