Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 193
For infrastructure administrators (resource management) windows/linux
Hide thumbs
Also See for ServerView Resource Orchestrator Cloud Edition V3.1.0:
- User manual (247 pages)
Table of Contents
Advertisement
Disk type
Select a disk type.
-
SAN (Storage Area Network)
Select when using SAN storage.
-
iSCSI
Select when using iSCSI storage.
Disk
Clicking <Add> displays the [Disk Definitions] dialog.
Specify the following items for each disk:
Size * Number of Disks
-
Size
Enter a number with up to one decimal place, in units of gigabytes. Values of 0.1 or larger can be specified.
-
Number
Clicking <Add> will display the [Disk Definitions] dialog, and then specify the number of disks to add. Specify a number 1 or
larger.
Resource type
Specify the disk to allocate to the L-Server.
Select from the following items.
-
Automatic assignment
Select a suitable virtual storage resource from those registered in the appropriate storage pool. Create the specified size of disk
resources, and allocate them to the L-Server. Set [Automatic] for the default value.
Note
-
When there are storage pools with and without Thin Provisioning attributes configured that have the same priority, the storage
pool that will be given priority is decided based on definition files. For details on definition files, refer to "C.1 Definition Files
Commonly Shared when Creating Virtual L-Servers" in the "Setup Guide CE".
-
If dynamic LUN mirroring has been set in the virtual storage, a volume is also created on the ETERNUS storage in the remote
site specified in the definition file. If the ETERNUS storage in the remote site has been detected by Resource Orchestrator, it
will be detected as a disk resource that was prepared beforehand, but do not register it to the storage pool.
-
Storage pool
Select a virtual storage resource registered in the specified storage pool. Create the specified size of disk resources, and allocate
them to the L-Server.
-
Virtual storage
Displays virtual storage resources such as RAID groups or aggregates as a list.
Select from the displayed virtual storage resources.
Create the specified size of disk resources from the specified virtual storage resource, and allocate them to the L-Server.
When using the virtual storage resource on which the Thin Provisioning attributes are configured, the disk resource can be created
specifying a size exceeding the actual disk space.
-
Disk
Assign the LUN created in advance to the L-Server.
- 177 -
Advertisement
Table of Contents
