Import; Deleting - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

Note
When creating a virtual L-Server, the values in the VM specific information definition file are used even if those values have not been set
in the L-Server template.
If there are discrepancies between the L-Server template and VM specific information definition file (e.g. CPU performance is lower than
CPU Reserve), L-Server creation will fail.
For details on VM specific information definition files, refer to "C.1 Definition Files Commonly Shared when Creating Virtual L-Servers"
in the "Setup Guide CE".

15.2.3 Import

This section explains how to import an L-Server template.
Use the following procedure to import L-Server templates edited in
1.
Select the ROR console orchestration tree, and select [File]-[L-Server Template]-[Import] from the ROR console menu.
2.
Specify the file name, and click <OK>.
The L-Server template is imported.
When a registered L-Server template name is included in the specified file, a warning dialog is displayed to confirm whether to
overwrite the L-Server template.
When overwriting it, click <OK>.
When not overwriting it, click <Cancel> and return to the dialog to specify the file name.
If a template is imported without editing the L-Server template name of the L-Server template file which was exported in
Editing", the content of the existing L-Server template will be overwritten.
If a template is imported after changing the L-Server template name of the L-Server template file which was exported in step 2, a new L-
Server template will be added, leaving the content of the existing template intact.
From the command-line, execute rcxadm template import.
For details on the rcxadm template import command, refer to "8.1 rcxadm template" in the "Reference Guide (Command/XML) CE".

15.2.4 Deleting

This section explains how to delete an L-Server template.
L-Server templates that are no longer required, including the sample template, can be deleted.
Use the following method to delete an L-Server template:
On the [Template List] tab, right-click the L-Server template to delete, and select [Delete] from the popup menu.
From the command-line, execute rcxadm template delete.
For details on the rcxadm template delete command, refer to "8.1 rcxadm template" in the "Reference Guide (Command/XML) CE".
Point
When deleting an L-Server template, do not delete until after confirming that it is not being used as a type of L-Platform Template Server.
If an L-Server template (being used for L-Platform templates) and image information is mistakenly deleted, rectify it by performing the
following procedure:
1.
After unpublishing the L-Platform template that uses the L-Server template which was deleted from the Template tab, delete it.
After unpublishing the image information that uses the L-Server template which was deleted from the Template tab, delete it.
1.
In cases where deleting does not work in either 1 or 2, as there is an L-Platform that has completed deployment, recreate an L-Server
template with the same name.
"15.2.2 Editing".
- 164 -
"15.2.2