Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 185

Network (NIC)
Select a network resource to connect to the NIC of the L-Server.
A list of the NICs defined in the L-Server template is displayed. Select the network to connect to each NIC from the [Network
to connect] column.
a.
Click <Select> in the [Network to connect] column.
The [Select a Network Resource] dialog is displayed.
b.
The following items are displayed: Select the network resource to connect.
- Name (Label)
- Admin LAN
- Subnet address
- Number of addresses (Unused/Total)
For physical L-Servers, the network connection can be selected in addition to these items.
- Connect
Specify when connecting network resources.
- Do not connect
Specify when not connecting network resources, only creating a configuration definition.
Note
The network (NIC) number corresponds to a NIC number (NICIndex) + 1 that is defined in L-Server templates.
[OVM for x86]
One or more networks must be specified.
Label (Optional)
A custom label can be defined for the L-Server. User-defined labels make it easier to identify the server.
Enter a maximum of 32 characters.
Comment (Optional)
A custom comment can be defined for the L-Server. For example, registering detailed work content, troubleshooting, and
recovery procedures can speed up the recovery of affected applications when a problem occurs.
Enter a maximum of 256 characters.
3.
Click <OK>.
The L-Server is created.
The process status can be checked in the Recent Operations area of the ROR console.
When creating a physical L-Server specifying image deployment, clicking <Cancel> in the Recent Operations area displays a
confirmation dialog and stops the process.
Note
-
Please note that canceling the creation of a physical L-Server specifying image deployment does not restore the destination
server to the state before image deployment took place.
-
When operations are cancelled on the last part, the physical L-Server may remain.
Delete the physical L-Server, from the [Resource] tab on the ROR console. For details on how to delete an L-Server, refer to
"17.4 Deleting an L-Server".
- 169 -