Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 95
For infrastructure administrators (resource management) windows/linux
Hide thumbs
Also See for ServerView Resource Orchestrator Cloud Edition V3.1.0:
- User manual (247 pages)
Table of Contents
Advertisement
-
When using end host mode for the following LAN switch blades, it is not possible to modify the port VLAN ID, or remove a tag vlan
for the external ports which meet the following conditions.
When performing the operation, inactivate the target external port, or change the VLAN ID for internal ports which have the same
VLAN ID as the target external port.
LAN switch blade
-
PY CB Eth Switch/IBP 1Gb 36/8+2
-
PY CB Eth Switch/IBP 1Gb 36/12
-
PY CB Eth Switch/IBP 1Gb 18/6
Conditions
-
The port is selected as Selected Port
-
The port is activated
-
More than one internal port has the same VLAN.
Changing VLAN IDs
This section explains how to change VLAN IDs set on the external ports of a LAN switch.
-
With Port VLANs
Use the following procedure to change VLAN IDs:
1.
In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from
the popup menu.
The [VLAN Settings] dialog is displayed.
2.
To use this feature, the following settings must first be defined:
VLAN
Select "Change" and select the VLAN ID that has been changed.
Physical Port, Link Aggregation
Select [Untagged] from the VLAN type of the port number to configure or link aggregation group name.
3.
Click <OK>.
The VLAN ID is changed.
-
With Tagged VLANs
First delete the VLAN ID was set on the desired LAN switch blade port before setting the new VLAN ID.
Use the following procedure to change VLAN IDs:
1.
In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from
the popup menu.
The [VLAN Settings] dialog is displayed.
2.
To use this feature, the following settings must first be defined:
VLAN
Select "Change" and select the VLAN ID that has been changed.
Physical Port, Link Aggregation
Select [None] from the VLAN type of the port number to configure or link aggregation group name.
3.
Click <OK>.
The VLAN ID set for the selected LAN switch blade port is released.
- 79 -
Advertisement
Table of Contents
