Network Device Maintenance; Replacement Procedure Of Network Devices - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation Manual

When replacing an entire server, a CPU, or memory, if there are differences in the CPU or memory specifications before and after the
replacement, reflect the new CPU and memory specifications of the replaced server in the definition file before reconfiguring hardware
information.
-
For Virtual L-Servers
For details on definition files, refer to "C.1.4 Configuration when Creating a Virtual L-Server Using a Server which cannot Use
ServerView Agents" in the "Setup Guide CE".
-
For Physical L-Servers
For details on definition files, refer to "B.1.6 Configuration when Creating a Physical L-Server without Specifying a Model Name in
the L-Server Template" in the "Setup Guide CE".
In the following cases, reflect the correct value on the definition file before reconfiguring the hardware information.
-
When defining the configuration information (CPU core count, CPU clock speed, memory capacity, etc.) of the target server after
registering it with Resource Orchestrator
-
When modifying the configuration information (CPU core count, CPU clock speed, memory capacity, etc.) of a server that has been
registered with Resource Orchestrator, in the definition file
For details on reconfiguring hardware properties, refer to

9.5 Network Device Maintenance

This section explains how to maintain network devices that are the target of management in Resource Orchestrator.

9.5.1 Replacement Procedure of Network Devices

This section explains the procedure to replace network devices when it becomes necessary due to failure.
"9.3.1 Reconfiguration of Hardware
- 62 -
Properties".