Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 227

[Windows]
Remote desktop connection
[Linux]
SSH connection
Prerequisites for Console Connections
When using a console connection, the prerequisites differ depending on the server type of the L-Server used.
-
For Physical L-Servers
When the hardware is PRIMERGY, and the iRMC video console redirection function can be used, connection to the console is possible.
Note
For console connection, use functions of ServerView Operations Manager.
For details on ServerView Operations Manager, refer to "2.4.2.4 Required Software" in the "Design Guide CE".
-
For Virtual L-Servers
On VMware and Hyper-V, when an admin client is installed, and communication between admin clients and VM hosts is possible,
connection of the console is possible.
Note
For console connection, use admin client functions. Check if the console connection is possible from the admin client in advance.
[VMware]
Normally, the admin server notifies the admin client of the IP address of the admin LAN of the VM host registered with the admin
server to use as the connection destination for the console. For this reason, the console cannot be connected to by admin clients that
exist on networks that are not connected to the admin LAN.
To connect to the console from a admin client that is connected only to the public LAN, in the definition file on the admin server, set
the VM host connection destination that can be connected from the admin client. The admin server notifies of the VM host connection
destination that can be connected from the public LAN and the admin client can connect to the console.
Note
If the destination for connection of a public LAN that has been set for a VM host is specified in the definition file, a console connection
from the admin LAN will be unavailable.
Further, the VM host connection can be specified for each tenant. The L-Server console connection stored in tenants makes requests
to the VM host connection set in the definition file. One VM host can be shared by multiple tenants in an environment where there is
a separate public LAN for each tenant.
Preparations for using a console connection from a public LAN
Preparations are necessary in order to use a console connection from a public LAN.
For details, refer to "E.1 VMware" in the "Design Guide CE".
Setting the VM Host Connection for each Tenant
Set the VM host connection for when the console window for the L-Server stored in the tenant is started.
For details, refer to "C.2 VMware" in the "Setup Guide CE".
- 211 -