Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 201
For infrastructure administrators (resource management) windows/linux
Hide thumbs
Also See for ServerView Resource Orchestrator Cloud Edition V3.1.0:
- User manual (247 pages)
Table of Contents
Advertisement
[Solaris Zones]
When the specifying VM host to use, please choose a VM host suitable for specification of "Server Recovery".
-
If the [HA] checkbox is selected
Choose a VM host with spare server settings.
Resource release
Specify whether add the CPU and memory of the VM guests allocated to the L-Server to the total of the VM pool, when the power of
the L-Server is OFF.
When the [Automatic (when powered off)] checkbox is checked, the CPU and memory of VM guests allocated to L-Servers cannot
be calculated as the total usage amount of VM pools.
Boot Location
Decide whether the physical location of servers to be allocated to the L-Server can be changed.
-
Fixed
Starts the L-Server on the same VM host that operated last time. Move the L-Server between servers to start it on a separate VM
host.
-
Relocate at startup
Automatically selects the optimal VM host when the L-Server is started. When [VM host] is specified, select VM hosts from the
range.
Note
When RHEL-Xen is specified for the VM type, select [Fixed].
Server Recovery
Specify the server redundancy to allocate to the L-Server. To enable redundancy, select the [HA] checkbox.
[VMware] [OVM for x86]
-
If the [HA] checkbox is selected
The HA function is located on an enabled VM host.
When there is no VM host for which the HA function has been enabled, the L-Server for which a configuration definition has
already been created cannot be started.
-
If the [HA] checkbox is not selected
The HA function will be preferentially located on a disabled VM host.
However, the HA function will place a VM guest on an enabled VM host in the following cases:
-
The HA function is not located on a disabled VM host
-
There is no available CPU or memory
-
The status, power status, and maintenance mode of other VM hosts are not suitable.
[Solaris Zones]
-
If the [HA] checkbox is selected
It is located on a VM host with a spare server configured.
When there are no VM hosts with a spare server configured, the L-Server for which a configuration definition has already been
created cannot be started.
-
If the [HA] checkbox is not selected
It will be preferentially located on a VM host without a spare server configured.
However, in the following cases the VM guest will be located on a VM host with a spare server configured:
- 185 -
Advertisement
Table of Contents
